Evolution Aqua EazyPod Automatic UV
Evolution Aqua EazyPod Automatic UV
Self-cleaning, automatic mechanical and biological filter system.
Two colours to choose from.
Lead time, up to 5-7 working days
Description
Description
Overview
How the EazyPod Automatic works
The concept of the EazyPod Automatic is simple yet innovative. Water enters via the inlet and passes over an 18-watt UV Clarifying bulb (on UV versions), helping to kill any single-celled algae in the water. The water then enters the outer chamber, which runs around the entire circumference of the EazyPod. Between the outer chamber and the inner chamber, there is a stainless steel perforated screen. These perforations are situated in the lower half of the screen and around its entire face. This means that when the water passes from the outer to the inner chamber, a downward and upward flow is created. This causes many of the larger solids to settle in the base of the outer chamber, due to the force of gravity. The size of the perforations will not allow large mechanical waste to enter the inner chamber, thus acting as a first-stage mechanical filter. The inner chamber holds 18 litres of static K1 Micromedia. As the water enters the inner chamber, the fine smaller solids become entrapped in the K1Micro. After passing through the K1 Micro, the clean water then rises and overflows into the inner return pipe. From here it returns to the pond via the return outlet. The EazyPod Automatic filtration system gives water quality and clarity that surpasses all expectations. The nature and volume of the K1 Micro mean, that when static, apart from being a very efficient mechanical filter, there is more than enough surface area for beneficial bacteria to colonise. Therefore on a smaller pond, the EazyPod Automatic is an excellent complete filter.
Installing the EazyPod Automatic
PUMP-FED INSTALLATION ONLY
By this, we mean that your pump is going to be used to supply the water to the filter. The filtered water then returns back into your pond via gravity, i.e. down a waterfall, or through a large diameter pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump).
Cleaning Cycle
The K1 Micro is cleaned by the integrated air pump located inside the control box, that is connected to the airline in the EazyPod Automatic, which in turn goes to an air ring in the base of the inner chamber. The air ring has small holes in it which causes the K1 Micro to move and therefore clean itself. During the cleaning cycle, the finer particles escape into chamber from the K1 Micro. This waste water will be automatically dumped via a 1 inch motorised ball valve.
Cleaning is fully automated on the EazyPod Automatic, and is controlled by a built-in timer, which is factory set at one clean every 3 days, however, this is easily adjustable to fit in with your pond requirements. The EazyPod Automatic will run a cleaning cycle which lasts approximately 6 and a half minutes.
Product Specification
Product Specification
Specifications
Model | Max Pond Size Ornamental Fish | Max Pond Size with Koi | Max Feed Rate | Volume of water in filter | Max flow rate | Recommended air pump | UV-C bulb |
10,000 Litres2,200 Gallons2,640 Us Gallons | 10,000 Litres2,200 Gallons2,640 US Gallons | 100 - 125g Per Day | 80 Litres18 Gallons21 US Gallons | 10,000 Lph2,200 Gph2,640 US Gph | Built-In Inside Control Box | x | |
10,000 Litres2,200 Gallons2,640 US Gallons | 10,000 Litres2,200 Gallons2,640 US Gallons | 100 - 125g Per Day | 80 Litres18 Gallons21 US Gallons | 10,000 Lph2,200 Gph2,640 US Gph | Built-In Inside Control Box | 18W PL-L |
Share
- Liner Length m / ft
- Liner Width m / ft
- Liner Area m2 / ft2
- Pond Volume l / gal
- Liner Length m / ft
- Liner Width m / ft
- Liner Area m2 / ft2
- Pond Volume l / gal